Add measurement

If you want to manually record measurements from older meters or add missing measurements (e.g. due to an operational interruption), click on the More icon in the center of the screen, in the Measurements table and then on Add Measurement. You can manually add a single measurement via the dialog that is displayed.

Date and Time

The exact time of the measurement.

State

Specify the type of the manually entered measurement. Further information on the statuses can be found under Metering Code Schweiz.

Value

The actually measured, read or estimated value.

Comment

Manually entered changes to measurements must be accompanied by a comment so that modifications can be traced at any time.

The new value then appears in the measurement list and in the diagram. If necessary, change the displayed date interval if the value is not displayed.